 |
Home |  |
Roof Top Blox News |  |
Find a Distributor |  |
Contact Us |
Adjustable Piping Support
US PAT. 7,731,131
Roof Top Blox Product Specifications
Body Material
Black UV stabilized Polypropylene
Copolymer .100" to .135" wall thickness
Black UV stabilized Polypropylene
Copolymer .100" to .135" wall thickness
Base Material
1" thick by 25lb density Type 3 closed cell Extruded Polystyrene foam
1" thick by 25lb density Type 3 closed cell Extruded Polystyrene foam
Dimensions & Weight
9" square by 4-1/2" high, top accessory adds 1-1/2" to height for 6" height requirements, Blox interlock end to end for wide multi-piping platforms. Weight: 1lb per Blox
9" square by 4-1/2" high, top accessory adds 1-1/2" to height for 6" height requirements, Blox interlock end to end for wide multi-piping platforms. Weight: 1lb per Blox
Load Bearing & Spacing
Up to 450lbs — apply STR-04 slotted steel strut channel under heavy loads over 250lbs. Space Blox approximately every 7 feet along all piping.
Up to 450lbs — apply STR-04 slotted steel strut channel under heavy loads over 250lbs. Space Blox approximately every 7 feet along all piping.
Pipe Fastening
Screw indents guide fastening screws into special internal engineered thread gripping feature. #10 sheet metal screws recommended. Blox supplied with 3/4" galvanized universal quick clamping strap for up to 2" pipe. Top surface easily adapts to all types of piping clamps, clips, slotted strut and 3/8" or 1/2" threaded rod. All pipe fastening and height adjustments done from top side only.
Screw indents guide fastening screws into special internal engineered thread gripping feature. #10 sheet metal screws recommended. Blox supplied with 3/4" galvanized universal quick clamping strap for up to 2" pipe. Top surface easily adapts to all types of piping clamps, clips, slotted strut and 3/8" or 1/2" threaded rod. All pipe fastening and height adjustments done from top side only.
Accessories
1-1/2" Polypropylene top height extender, 10" slotted steel strut, 12" threaded rod, pipe rollers, securing brackets, M-1 adhesive, and primer for M-1 adhesive.
1-1/2" Polypropylene top height extender, 10" slotted steel strut, 12" threaded rod, pipe rollers, securing brackets, M-1 adhesive, and primer for M-1 adhesive.
Warranty
5 years Roof Top Blox replacement against manufacturer's defects.
5 years Roof Top Blox replacement against manufacturer's defects.
Applications
Blox engineered to install on flat roof surfaces for supporting gas, condensate or refrigeration lines, electrical conduits, ductwork or roof top walkways and mechanical equipment. Rated for temperatures up to 200ºF—93ºC.
Blox engineered to install on flat roof surfaces for supporting gas, condensate or refrigeration lines, electrical conduits, ductwork or roof top walkways and mechanical equipment. Rated for temperatures up to 200ºF—93ºC.
Suggested Engineering Specification
Roof top piping and mechanical support blocks shall be Roof Top Blox manufactured by Dymotek Corporation. Body molded from UV-resistant Polypropylene Copolymer with a foam base platform of 1" thick, 25lb density closed cell polystyrene. Block and height extension accessory shall have multiple piping saddles to organize piping and internal heavy duty screw thread gripping feature. Block shall have provision to install 3/8" or 1/2" threaded rod with complete height adjustability from the top using engineered nut slots. Securing brackets and adhesive recommended on all metal and smooth membrane roofing applications to guard against block movement in high wind, water, and snow load conditions.
Roof top piping and mechanical support blocks shall be Roof Top Blox manufactured by Dymotek Corporation. Body molded from UV-resistant Polypropylene Copolymer with a foam base platform of 1" thick, 25lb density closed cell polystyrene. Block and height extension accessory shall have multiple piping saddles to organize piping and internal heavy duty screw thread gripping feature. Block shall have provision to install 3/8" or 1/2" threaded rod with complete height adjustability from the top using engineered nut slots. Securing brackets and adhesive recommended on all metal and smooth membrane roofing applications to guard against block movement in high wind, water, and snow load conditions.
